- DE
- EN
Our Dynamic Mapping also anticipates the next step. The air filter covers, developed in collaboration with Flatout Performance Parts, offer additional benefits in:
Our Dynamic Mapping also anticipates the next step. The optional intake snorkels and intake cover developed in cooperation with LEVARC offer additional benefits in:
We have launched a new page called "Tips and tricks for BMW bikes." Here we have collected some technical advice based on our experience and made it available to all BMW riders. Take a look!
Following the update for Power Mapping PRO in December, the time has finally come and we can now also release Race Mapping PRO in version 2026. We have spent another whole year refining it to make what was already good even better and to integrate new models into our portfolio. Key new features/improvements:
Now also available for M1000RR from 2025, S1000XR from 2024, and S1000R from 2025
All improvements to Power Mapping PRO – see news article from December 22, 2025
Power limitation: completely revised for RR models. Now with automatic adjustment to secondary gear ratio and inclusion of the wheelie control setting (higher WC setting = more torque reduction in gears 1 to 3)
DTC: improved control quality and further optimized slip target via lean angle and speed
Engine brake: further optimized control behavior and adjusted negative slip target
Cranking (video): Oil pressure build-up now possible before engine start (currently only C variant)
Pit lane speed limiter / Pit limiter (video): Activation via start button (press once with engine running) in gear 1 or N, e.g. in the pits! No longer necessary to hold the start button while driving)
Launch control: Driving modes with "auto on" and deactivated launch control available to enable starts with and without launch control (decision already made in the pits, no button press required on the starting grid)
Other minor improvements (e.g., reduction of error susceptibility at battery voltages below 12.6V)
We are starting the year by presenting a project for the R1300 models. The hand, tip, or handlebar shift using thumb operation is a retrofit solution for all BMW models with automated shift assistant (ASA). The retrofit can be completed in just a few simple steps and does not require any software modifications. We are implementing the project in collaboration with our well-known partners Flatout performance parts and re-elektronik. Interested? Then get in touch quickly – so we can plan the batch size for the first delivery and hopefully deliver before the start of the season.
With this news article, we would like to thank all interested readers of our homepage and subscribers to our newsletter! We look back with gratitude on a great year. A year with many more highlights than those that made it into a news article. We also neglected our public relations work somewhat so that we could be there for our customers 100%. The overwhelming amount of appreciation we receive in the form of positive feedback via email, Google, telephone, etc. is our motivation to keep going. Thank you, thank you, thank you!
This year, we were once again able to make a donation to the DRF Luftrettung and the Wings for Life Foundation.
The special thing behind the picture for this article: No - not the cookies on the GS! We retrofitted the original BMW seat heating to this BMW R1300GS in cooperation with Motorrad Pielmeier in Tiefenbach.
Merry Christmas, relaxing holidays and a healthy and successful 2026 season to all!
Robert and Rainer
This year we are once again working intensively on further improving our mappings for the M/S1000 models. We are starting with our Power Mapping PRO with the following new features / improvements:
And also a first feedback - thanks again to Marcel, Germany, S1000XR 2021 - update from v24 to v26 + short throttle:
"Package arrived yesterday, installed straight away, short throttle grip also screwed on. Everything worked out great [...] Rough conclusion after 50 km lap: no more jerking. I also rode in every gear and really made sure to ride constantly to feel any jerking, but it's simply no longer there. The torque is similar or the same as the old mapping [...]. Apart from that, the bike is much more agile, much more spontaneous thanks to the short-stroke throttle grip and simply rides better. More detailed conclusion after more riding time and with a direct comparison with my colleague who has the same model and the same year of manufacture (standard condition): So when you drive with the original mapping, you think someone is holding you down at the back. Because in contrast to the update, there is almost nothing at all at the bottom of the original! I've totally forgotten that again, the update has so much more power at the bottom and the short-stroke throttle grip makes the bike so aggressive and comes on immediately! In the original, you have to turn the throttle half a turn and then it moves forward so slowly. The bubbling is mega when you take the throttle off, [...] and the constant jerking is gone in every gear! No matter which gear, the bike runs so smoothly - top top top! [...] Shifting is also much smoother and easier below 4000 rpm, much easier than the original. And the cold start phase - the loud revving up is also history. I'm really happy with the update [...] and my colleague is thrilled too! He also thought he was riding a completely different model of the moped, so thank you very much for the mega great work."